IN STREAMER is designed for reliably reproducing and distributing MP2 and MP3 audio over Ethernet using IP protocols.
It is a professional solution for applications requiring audio to be sent cost-effectively and easily over standard IPNetworks covering long distances and/or to multiple locations.

IN STREAMER supports compressed audio in MP2 (MPEG1 Layer II) and MP3 (Layer III) formats. NS1 is ideal for audio transmission, live sound and streaming in standard IP/ Ethernet networks.

IN STREAMER applications can be user defined to control all units linked to external equipment with the factory supplied OEM library (DLL). Fully programmable routing control permits sending audio to any single or multple In-streamer units.

Audio

- Format: (TX) MPEG1/2-Layer III (RX) MPEG1/2-Layer II and III for UDP (raw) audio streaming

- Bit rate encoding: VBR from 32 to 192 Kb/sec (MPEG1-L3), from 8 to 160 Kb/sec (MPEG2-L3)

- Sampling frequency: 16/22,05/ 24/32/44,1/48 Khz Mode mono and stereo

- Bit rate decoding: from 32 to 384 Kb/sec (MPEG1-L2), from 32 to 320 Kb/sec (MPEG1-L3), from 8 to 160 Kb/sec (MPEG2-L2/3)

- Sampling frequency: 8/11,025/ 12/16/22, 05/24/32/44,1/48 Khz

- Mode: stereo, joint stereo, dual channel, single channel Audio Out : line level on 3.5 mm jack connector ;line level balanced output on terminal blocks (optional) Frequency response 20 - 20.000 Hz (+/- 3 dB)

- Signal to noise: ratio > 94 dB

- Crosstalk: <-80 dB

- THD 0,003%

Network: Interface RJ45 female connector full duplex IEEE 802.3 10/100 Mb/s protocols UDP (raw) encoding/decoding, HTTP (TCP) only decoding

Remote Control: Via internet, local ethernet network by Software or API

Power requirement: 12/24V DC or AC 90 mA (6 mm coaxial connector) Power Supply Unit included

Dimension: 110 x 80 x 30 mm

• InStreamer Brochure Eng.pdf - 694.11 KB
• Streamer, In-Streamer ENG 1.0.pdf - 1.09 MB
• Streamer, In-Streamer ITA 1.2.pdf - 4.33 MB