|
Mr. Light LED is a compact and efficient customizable signalling device, ideal for radio studios, recording booths, tv and radio control rooms, etc.
Mr. Light LED internal high intensity LED array provides optimal visibility in any environmental light condition; the display is available in single or double sided version depending on the illuminated faces, and it can be constantly illuminated or blinking depending on the user application.
Warning texts (such as 'On Air', 'Silence', etc) are printed on transparent films, fully customizable and easily replaceable. With the included bracket, Mr. Light LED can be wall or ceiling installed without efforts. An optional, additional bracket is available to allow easy "flag" mounting.
Mr. Light LED just requires a simple DC supply of between 12 and 15 Volts; an optional Mr. Light's custom power supply is available to provide enough power to operate a maximum of three units with full light combination management and mixing console interface.
|
|
|
Mr. Light LED is a compact and efficient customizable signalling device, ideal for radio studios, recording booths, tv and radio control rooms, etc.
Mr. Light LED internal high intensity LED array provides optimal visibility in any environmental light condition; the display is available in single or double sided version depending on the illuminated faces, and it can be constantly illuminated or blinking depending on the user application.
Warning texts (such as 'On Air', 'Silence', etc) are printed on transparent films, fully customizable and easily replaceable. With the included bracket, Mr. Light LED can be wall or ceiling installed without efforts. An optional, additional bracket is available to allow easy "flag" mounting.
Mr. Light LED just requires a simple DC supply of between 12 and 15 Volts; an optional Mr. Light's custom power supply is available to provide enough power to operate a maximum of three units with full light combination management and mixing console interface.
|
|
|
LED LAMP
- Operating Voltage: 12 to 15 Vdc
- Current: 330 mA
- Controls: Dimming, through recessed trimmer
- Dimensions: 351 x 124 x 58 mm (without bracket)
- Case: Inox steel
- Weight: Around 1.5 Kg
POWER SUPPLY
- AC Mains Input: IEC, 110V or 230V 50 / 60 Hz, fused, 15W maximum
- Dimensions: 109 x 48 x 70 mm
- DC outputs: 3 x 12 Volt, blinking or permanent (jumper-settable for each lamp)
- Controls: 3 x TTL / 3 x Clean Contacts (photocoupled, jumper-settable for each lamp)
- Control current supported by each port: 10 mA max, 5 mA nominal. An internal 1Kohm protection resistor is fitted on series on each port.
- Connections: Terminal blocks (supplied)
- Controls: Blinking rate adjustment (recessed trimmer)
- Blinking Rate: From 3 flashes/sec to 1 flash/sec
- Main Features:Capable of powering up to three LED lamps at the same time
|
|
|
We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.
Thank you!
|
|
|
We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.
Thank you!
|
|
|
We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.
Thank you!
|
|
|
