Macrotel D1 is a digital single-line telephone hybrid, featuring superior performances for Radio and TV phone connection requirements.

With the variety of telephone systems in the world today, from cellular mobile phones to analog and to digital, it's increasingly difficult to have all callers sound the same on-air in a broadcast environment. Macrotel D1 use digital signal processing (DSP) technology to continually adapt to telephone-line conditions and to deliver the maximum audio isolation.

Macrotel D1 also features a complete set of the most advanced remote control and connection facilities such as automated answering and ducking system.

Macrotel D1 is therefore ideal when the very best audio quality and uniformity is required for talk shows, news feeds, production, recording studios.

GENERAL DATA
- Power Supply: 220 / 110V 50 / 60 Hz 30VA
- Dimension: 434x351x44mm (1 rack unit)
- Weight: around 4 Kg
- Operating Temperature: 0-38°C
- Compliance: FCC, CSA, CE and CTR21

TELCO INTERFACE
- Tel line connector: RJ 11 (A-Lead supervision)
- Capability: POTS line or dry line (no DC offset voltage).
- Tel Set connector: RJ 11 (A-Lead supervision)

AUDIO IN / OUT
- Send input connector: XLR female, balanced bridging
- Send input level: Mic / Line sel. (-55 / 0 dBu) adj
- Send Input impedance: 20 KOhm
- Receive Output connector: XLR, electr. balanced
- Receive Output nominal level: 0 dBu (adjustable)
- Receive Output impedance: 50 Ohm
- REC Out connector: XLR, electr. balanced
- REC Out level: 0 dBu (adjustable)
- REC Out impedance: 50 Ohm
- MONITOR Output Connector: Jack ¼”, mono
- MONITOR Output power: 1W into 8 Ω load
- Send-to-Receive separation: > 55dB (250 Hz to 3.5 kHz)
- Send to Receive Tail time: 32 milliseconds
- Mix-Minus Rec.to Send separ: 50dB nominal
- Mix-Minus Tail time: 32 milliseconds

TELEPHONE TRANSMIT
- Frequency Response: 250Hz to 3.5kHz, ±1dB
- Signal to noise ratio: >56dB
- Distortion: <0.2%
- Level: Nominal Send input of 0dBu is referenced to -15dBm across the telephone line

TELEPHONE RECEIVE
- Frequency Response: 250Hz to 3.5kHz, ±1dB
- Signal to noise ratio: >56dB
- Distortion: <0.2%
- Level: Nominal telephone line level of – 15dBm referenced to Receive output of 0dBu

REMOTE INTERFACE
- Connector: DB 25 female
- Control Inputs: On, Off, and Monitor Mute
- Status Outputs: On, Off, Send Audio presence, Receive Audio presence
- Status Outputs type: open coll. (< 15V, < 39 mA)
- Additional Audio I/O (unbal.): Receive, REC, Aux-IN, Send

FRONT PANEL CONTROLS
- On/Off: Auto Answer/Disconn Select
- Send, Rcv, Rec, Aux-in Level: Ducking Sel. (0, 6, 12, 18dB)
- Monitor Volume Up / Down: AGC Select
- Receive Boost Select: Auto Mix-Minus Select
- Remote Mom/Latching Select: Mic / Line Select
- Burst Adapt Select: REC Send / Rcv mix Select

VERSIONS
- Different line interfaces for: Europe, Australia, America

• Macrotel D1 & D2 user manual ENG rev 1.3.pdf - 751.71 KB
• Depliant Macrotel_Boxtel ENG.pdf - 622.2 KB

We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.

Thank you!

We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.

Thank you!

We're currently updating our website; we're sorry for the inconvenience, please write us here to get more information.

Thank you!